4.14GB Unknown manufacturer, ST_M13FQBL, (NOT WORKING FOR PARTS/SCRAP)

4.14GB, ST_M13FQBL, used hard drive. Power-on hours are unavailable.

This drive is not working and is offered only for parts, scrap, or art projects.

Important notes

• This drive weighs 414 grams.
• Pending sectors: not reported
• Reallocated sectors: not reported
• Logged SMART errors: not reported
• CRC errors: not reported
• SMART overall health: UNKNOWN!
• Latest SMART self-test: not reported
• Badblocks results unavailable
• SMART attributes could not be read
• fdisk could not read the drive

You will receive this specific drive, identified in this listing as serial Z3T140M8.

This used drive is sold 'as is', with no warranty on its functionality. I do warrant that the testing described in this listing was actually performed on this specific drive and that the SMART output reproduced below is the output obtained from this drive. In general, SMART data can be erased or tampered with, for example to reset the reported powered-on hours to zero. I certify that I have not erased, reset, or otherwise tampered with this drive's SMART data, but I cannot certify that a previous owner has not done so.

Counters such as powered-on hours and power-cycle counts may differ slightly from the recorded output because the drive may have been powered on again between the time the SMART output was captured and packaging for shipment.

Output from fdisk -l /dev/sde

fdisk: cannot open /dev/sde: Input/output error

Output from hdparm -I /dev/sde

/dev/sde:

ATA device, with non-removable media
	Model Number:       ST_M13FQBL                              
	Serial Number:      QNR_BFW 
	Firmware Revision:  03011630
Standards:
	Used: ATA/ATAPI-6 T13 1410D revision 2 
	Supported: 6 5 4 
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:    16514064
	LBA    user addressable sectors:     8089950
	LBA48  user addressable sectors:     8089950
	Logical/Physical Sector size:           512 bytes
	device size with M = 1024*1024:        3950 MBytes
	device size with M = 1000*1000:        4142 MBytes (4 GB)
	cache/buffer size  = 2048 KBytes
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 16
	Recommended acoustic management value: 254, current value: 0
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	DOWNLOAD_MICROCODE
	    	SET_MAX security extension
	   *	48-bit Address feature set
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Native Command Queueing (NCQ)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
	not	supported: enhanced erase

Integrity word not set (found 0x0000, expected 0x97a5)

Output from smartctl -x /dev/sde

smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-30-generic] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST_M13FQBL
Serial Number:    QNR_BFW
Firmware Version: 03011630
User Capacity:    4,142,054,400 bytes [4.14 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database 7.5/5706
ATA Version is:   ATA/ATAPI-6 T13/1410D revision 2
Local Time is:    Fri Sep 11 20:07:26 2026 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]

Read SMART Data failed: scsi error aborted command

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error aborted command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed: scsi error aborted command

General Purpose Log Directory not supported

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

Read SMART Error Log failed: scsi error aborted command

SMART Extended Self-test Log (GP Log 0x07) not supported

Read SMART Self-test Log failed: scsi error aborted command

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11) not supported