{"title":"Hard Drives","description":null,"products":[{"product_id":"used-4tb-western-digital-red-plus-1442-powered-on-hours","title":"4TB Western Digital Red Plus (Used: 1485 Powered On Hours)","description":"\u003cp\u003eThis is a used 4TB Western Digital Red Plus internal 3.5 5400RPM, 3.5\", SATA III hard drive.\u003c\/p\u003e\n\u003cp\u003eThis drive still works perfectly and it passes multiple passes with badblocks and an extended smart test.  It has ~1485 total hours powered on.  I am selling this drive so I can replace it with a pool of much larger 16TB drives that take up less space.\u003c\/p\u003e\n\u003cp\u003eYou will receive the exact same drive with the serial number shown in the images.  \u003c\/p\u003e\n\u003cp\u003eSince this is a used drive, it is being sold 'as is' and without warranty.   I can personally certify that the output shown below is real and was actually run on this specific drive by me, and also that I ran badblocks tests on this specific drive and found no issues.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eHere is the output from running fdisk -l \/dev\/sdc on this drive:\u003c\/h1\u003e\n\u003cpre\u003e Disk \/dev\/sdc: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors\nDisk model: EFZX-68AWUN0 \nUnits: sectors of 1 * 512 = 512 bytes\nSector size (logical\/physical): 512 bytes \/ 4096 bytes\nI\/O size (minimum\/optimal): 4096 bytes \/ 4096 bytes\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eHere is the output from running hdparm -I \/dev\/sdc on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e \n\/dev\/sdc:\n\nATA device, with non-removable media\n\tModel Number: WDC WD40EFZX-68AWUN0 \n\tSerial Number: WD-WX42D91NDAKJ\n\tFirmware Revision: 81.00B81\n\tTransport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0\nStandards:\n\tUsed: unknown (minor revision code 0x006d) \n\tSupported: 10 9 8 7 6 5 \n\tLikely used: 10\nConfiguration:\n\tLogical\t\tmax\tcurrent\n\tcylinders\t16383\t0\n\theads\t\t16\t0\n\tsectors\/track\t63\t0\n\t--\n\tLBA user addressable sectors: 268435455\n\tLBA48 user addressable sectors: 7814037168\n\tLogical Sector size: 512 bytes\n\tPhysical Sector size: 4096 bytes\n\tLogical Sector-0 offset: 0 bytes\n\tdevice size with M = 1024*1024: 3815447 MBytes\n\tdevice size with M = 1000*1000: 4000787 MBytes (4000 GB)\n\tcache\/buffer size = unknown\n\tForm Factor: 3.5 inch\n\tNominal Media Rotation Rate: 5400\nCapabilities:\n\tLBA, IORDY(can be disabled)\n\tQueue depth: 32\n\tStandby timer values: spec'd by Standard, with device specific minimum\n\tR\/W multiple sector transfer: Max = 16\tCurrent = 16\n\tDMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 \n\t Cycle time: min=120ns recommended=120ns\n\tPIO: pio0 pio1 pio2 pio3 pio4 \n\t Cycle time: no flow control=120ns IORDY flow control=120ns\nCommands\/features:\n\tEnabled\tSupported:\n\t *\tSMART feature set\n\t \tSecurity Mode feature set\n\t *\tPower Management feature set\n\t *\tWrite cache\n\t *\tLook-ahead\n\t *\tWRITE_BUFFER command\n\t *\tREAD_BUFFER command\n\t *\tNOP cmd\n\t *\tDOWNLOAD_MICROCODE\n\t *\t48-bit Address feature set\n\t *\tDevice Configuration Overlay feature set\n\t *\tMandatory FLUSH_CACHE\n\t *\tFLUSH_CACHE_EXT\n\t *\tSMART error logging\n\t *\tSMART self-test\n\t *\tGeneral Purpose Logging feature set\n\t *\t64-bit World wide name\n\t *\tIDLE_IMMEDIATE with UNLOAD\n\t *\tWRITE_UNCORRECTABLE_EXT command\n\t *\t{READ,WRITE}_DMA_EXT_GPL commands\n\t *\tSegmented DOWNLOAD_MICROCODE\n\t *\tGen1 signaling speed (1.5Gb\/s)\n\t *\tGen2 signaling speed (3.0Gb\/s)\n\t *\tGen3 signaling speed (6.0Gb\/s)\n\t *\tNative Command Queueing (NCQ)\n\t *\tHost-initiated interface power management\n\t *\tPhy event counters\n\t *\tIdle-Unload when NCQ is active\n\t *\tNCQ priority information\n\t *\tREAD_LOG_DMA_EXT equivalent to READ_LOG_EXT\n\t \tDevice-initiated interface power management\n\t *\tSoftware settings preservation\n\t *\tSMART Command Transport (SCT) feature set\n\t *\tSCT Write Same (AC2)\n\t *\tSCT Error Recovery Control (AC3)\n\t *\tSCT Features Control (AC4)\n\t *\tSCT Data Tables (AC5)\n\t \tunknown 206[12] (vendor specific)\n\t \tunknown 206[13] (vendor specific)\n\t *\tDOWNLOAD MICROCODE DMA command\n\t *\tWRITE BUFFER DMA command\n\t *\tREAD BUFFER DMA command\nSecurity: \n\tMaster password revision code = 65534\n\t\tsupported\n\tnot\tenabled\n\tnot\tlocked\n\tnot\tfrozen\n\tnot\texpired: security count\n\t\tsupported: enhanced erase\n\t448min for SECURITY ERASE UNIT. 448min for ENHANCED SECURITY ERASE UNIT.\nLogical Unit WWN Device Identifier: 50014ee269f15004\n\tNAA\t\t: 5\n\tIEEE OUI\t: 0014ee\n\tUnique ID\t: 269f15004\nChecksum: correct\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eAnd here is the result from running smartctl -x \/dev\/sdc on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cpre\u003e smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-14-generic] (local build)\nCopyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF INFORMATION SECTION ===\nModel Family: Western Digital Red (CMR)\nDevice Model: WDC WD40EFZX-68AWUN0\nSerial Number: WD-WX42D91NDAKJ\nLU WWN Device Id: 5 0014ee 269f15004\nFirmware Version: 81.00B81\nUser Capacity: 4,000,787,030,016 bytes [4.00 TB]\nSector Sizes: 512 bytes logical, 4096 bytes physical\nRotation Rate: 5400 rpm\nForm Factor: 3.5 inches\nDevice is: In smartctl database 7.5\/5706\nATA Version is: ACS-3 T13\/2161-D revision 5\nSATA Version is: SATA 3.1, 6.0 Gb\/s (current: 6.0 Gb\/s)\nLocal Time is: Thu Aug 6 20:23:42 2026 UTC\nSMART support is: Available - device has SMART capability.\nSMART support is: Enabled\nAAM feature is: Unavailable\nAPM feature is: Unavailable\nRd look-ahead is: Enabled\nWrite cache is: Enabled\nDSN feature is: Unavailable\nATA Security is: Disabled, NOT FROZEN [SEC1]\n\n=== START OF READ SMART DATA SECTION ===\nSMART Status not supported: Incomplete response, ATA output registers missing\nSMART overall-health self-assessment test result: PASSED\nWarning: This result is based on an Attribute check.\n\nGeneral SMART Values:\nOffline data collection status: (0x00)\tOffline data collection activity\n\t\t\t\t\twas never started.\n\t\t\t\t\tAuto Offline Data Collection: Disabled.\nSelf-test execution status: ( 0)\tThe previous self-test routine completed\n\t\t\t\t\twithout error or no self-test has ever \n\t\t\t\t\tbeen run.\nTotal time to complete Offline \ndata collection: \t\t(40980) seconds.\nOffline data collection\ncapabilities: \t\t\t (0x11) SMART execute Offline immediate.\n\t\t\t\t\tNo Auto Offline data collection support.\n\t\t\t\t\tSuspend Offline collection upon new\n\t\t\t\t\tcommand.\n\t\t\t\t\tNo Offline surface scan supported.\n\t\t\t\t\tSelf-test supported.\n\t\t\t\t\tNo Conveyance Self-test supported.\n\t\t\t\t\tNo Selective Self-test supported.\nSMART capabilities: (0x0003)\tSaves SMART data before entering\n\t\t\t\t\tpower-saving mode.\n\t\t\t\t\tSupports SMART auto save timer.\nError logging capability: (0x01)\tError logging supported.\n\t\t\t\t\tGeneral Purpose Logging supported.\nShort self-test routine \nrecommended polling time: \t ( 2) minutes.\nExtended self-test routine\nrecommended polling time: \t ( 435) minutes.\nSCT capabilities: \t (0x303d)\tSCT Status supported.\n\t\t\t\t\tSCT Error Recovery Control supported.\n\t\t\t\t\tSCT Feature Control supported.\n\t\t\t\t\tSCT Data Table supported.\n\nSMART Attributes Data Structure revision number: 16\nVendor Specific SMART Attributes with Thresholds:\nID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0\n 3 Spin_Up_Time POS--K 234 225 021 - 3291\n 4 Start_Stop_Count -O--CK 100 100 000 - 119\n 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0\n 7 Seek_Error_Rate -OSR-K 200 200 000 - 0\n 9 Power_On_Hours -O--CK 098 098 000 - 1485\n 10 Spin_Retry_Count -O--CK 100 100 000 - 0\n 11 Calibration_Retry_Count -O--CK 100 100 000 - 0\n 12 Power_Cycle_Count -O--CK 100 100 000 - 110\n192 Power-Off_Retract_Count -O--CK 200 200 000 - 54\n193 Load_Cycle_Count -O--CK 200 200 000 - 407\n194 Temperature_Celsius -O---K 115 108 000 - 35\n196 Reallocated_Event_Count -O--CK 200 200 000 - 0\n197 Current_Pending_Sector -O--CK 200 200 000 - 0\n198 Offline_Uncorrectable ----CK 100 253 000 - 0\n199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0\n200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0\n ||||||_ K auto-keep\n |||||__ C event count\n ||||___ R error rate\n |||____ S speed\/performance\n ||_____ O updated online\n |______ P prefailure warning\n\nGeneral Purpose Log Directory Version 1\nSMART Log Directory Version 1 [multi-sector log support]\nAddress Access R\/W Size Description\n0x00 GPL,SL R\/O 1 Log Directory\n0x01 SL R\/O 1 Summary SMART error log\n0x02 SL R\/O 5 Comprehensive SMART error log\n0x03 GPL R\/O 6 Ext. Comprehensive SMART error log\n0x04 GPL,SL R\/O 8 Device Statistics log\n0x06 SL R\/O 1 SMART self-test log\n0x07 GPL R\/O 1 Extended self-test log\n0x09 SL R\/W 1 Selective self-test log\n0x10 GPL R\/O 1 NCQ Command Error log\n0x11 GPL R\/O 1 SATA Phy Event Counters log\n0x30 GPL,SL R\/O 9 IDENTIFY DEVICE data log\n0x80-0x9f GPL,SL R\/W 16 Host vendor specific log\n0xa0-0xa7 GPL,SL VS 16 Device vendor specific log\n0xa8-0xb6 GPL,SL VS 1 Device vendor specific log\n0xb7 GPL,SL VS 78 Device vendor specific log\n0xbd GPL,SL VS 1 Device vendor specific log\n0xc0 GPL,SL VS 1 Device vendor specific log\n0xc1 GPL VS 93 Device vendor specific log\n0xe0 GPL,SL R\/W 1 SCT Command\/Status\n0xe1 GPL,SL R\/W 1 SCT Data Transfer\n\nSMART Extended Comprehensive Error Log Version: 1 (6 sectors)\nNo Errors Logged\n\nSMART Extended Self-test Log Version: 1 (1 sectors)\nNum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n# 1 Extended offline Completed without error 00% 1478 -\n# 2 Extended offline Completed without error 00% 1372 -\n\nSelective Self-tests\/Logging not supported\n\nSCT Status Version: 3\nSCT Version (vendor specific): 258 (0x0102)\nDevice State: Active (0)\nCurrent Temperature: 35 Celsius\nPower Cycle Min\/Max Temperature: 30\/41 Celsius\nLifetime Min\/Max Temperature: 18\/42 Celsius\nUnder\/Over Temperature Limit Count: 0\/0\nVendor specific:\n01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n\nSCT Temperature History Version: 2\nTemperature Sampling Period: 1 minute\nTemperature Logging Interval: 1 minute\nMin\/Max recommended Temperature: 0\/65 Celsius\nMin\/Max Temperature Limit: -41\/85 Celsius\nTemperature History Size (Index): 478 (244)\n\nIndex Estimated Time Temperature Celsius\n 245 2026-08-06 12:26 34 ***************\n ... ..( 42 skipped). .. ***************\n 288 2026-08-06 13:09 34 ***************\n 289 2026-08-06 13:10 35 ****************\n ... ..( 4 skipped). .. ****************\n 294 2026-08-06 13:15 35 ****************\n 295 2026-08-06 13:16 37 ******************\n ... ..( 63 skipped). .. ******************\n 359 2026-08-06 14:20 37 ******************\n 360 2026-08-06 14:21 38 *******************\n ... ..( 4 skipped). .. *******************\n 365 2026-08-06 14:26 38 *******************\n 366 2026-08-06 14:27 37 ******************\n ... ..( 2 skipped). .. ******************\n 369 2026-08-06 14:30 37 ******************\n 370 2026-08-06 14:31 36 *****************\n ... ..( 3 skipped). .. *****************\n 374 2026-08-06 14:35 36 *****************\n 375 2026-08-06 14:36 35 ****************\n ... ..( 4 skipped). .. ****************\n 380 2026-08-06 14:41 35 ****************\n 381 2026-08-06 14:42 34 ***************\n ... ..( 10 skipped). .. ***************\n 392 2026-08-06 14:53 34 ***************\n 393 2026-08-06 14:54 33 **************\n ... ..( 27 skipped). .. **************\n 421 2026-08-06 15:22 33 **************\n 422 2026-08-06 15:23 32 *************\n 423 2026-08-06 15:24 33 **************\n ... ..( 9 skipped). .. **************\n 433 2026-08-06 15:34 33 **************\n 434 2026-08-06 15:35 34 ***************\n ... ..( 23 skipped). .. ***************\n 458 2026-08-06 15:59 34 ***************\n 459 2026-08-06 16:00 35 ****************\n ... ..( 79 skipped). .. ****************\n 61 2026-08-06 17:20 35 ****************\n 62 2026-08-06 17:21 34 ***************\n ... ..( 20 skipped). .. ***************\n 83 2026-08-06 17:42 34 ***************\n 84 2026-08-06 17:43 33 **************\n ... ..(125 skipped). .. **************\n 210 2026-08-06 19:49 33 **************\n 211 2026-08-06 19:50 34 ***************\n ... ..( 32 skipped). .. ***************\n 244 2026-08-06 20:23 34 ***************\n\nSMART WRITE LOG does not return COUNT and LBA_LOW register\nSCT (Get) Error Recovery Control command failed\n\nDevice Statistics (GP Log 0x04)\nPage Offset Size Value Flags Description\n0x01 ===== = = === == General Statistics (rev 1) ==\n0x01 0x008 4 110 --- Lifetime Power-On Resets\n0x01 0x010 4 1485 --- Power-on Hours\n0x01 0x018 6 89692281251 --- Logical Sectors Written\n0x01 0x020 6 514157931 --- Number of Write Commands\n0x01 0x028 6 127178538145 --- Logical Sectors Read\n0x01 0x030 6 597117351 --- Number of Read Commands\n0x01 0x038 6 1051032704 --- Date and Time TimeStamp\n0x03 ===== = = === == Rotating Media Statistics (rev 1) ==\n0x03 0x008 4 1480 --- Spindle Motor Power-on Hours\n0x03 0x010 4 911 --- Head Flying Hours\n0x03 0x018 4 462 --- Head Load Events\n0x03 0x020 4 0 --- Number of Reallocated Logical Sectors\n0x03 0x028 4 0 --- Read Recovery Attempts\n0x03 0x030 4 0 --- Number of Mechanical Start Failures\n0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors\n0x03 0x040 4 54 --- Number of High Priority Unload Events\n0x04 ===== = = === == General Errors Statistics (rev 1) ==\n0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors\n0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion\n0x05 ===== = = === == Temperature Statistics (rev 1) ==\n0x05 0x008 1 36 --- Current Temperature\n0x05 0x010 1 36 --- Average Short Term Temperature\n0x05 0x018 1 34 --- Average Long Term Temperature\n0x05 0x020 1 42 --- Highest Temperature\n0x05 0x028 1 22 --- Lowest Temperature\n0x05 0x030 1 39 --- Highest Average Short Term Temperature\n0x05 0x038 1 29 --- Lowest Average Short Term Temperature\n0x05 0x040 1 34 --- Highest Average Long Term Temperature\n0x05 0x048 1 32 --- Lowest Average Long Term Temperature\n0x05 0x050 4 0 --- Time in Over-Temperature\n0x05 0x058 1 65 --- Specified Maximum Operating Temperature\n0x05 0x060 4 0 --- Time in Under-Temperature\n0x05 0x068 1 0 --- Specified Minimum Operating Temperature\n0x06 ===== = = === == Transport Statistics (rev 1) ==\n0x06 0x008 4 669 --- Number of Hardware Resets\n0x06 0x010 4 249 --- Number of ASR Events\n0x06 0x018 4 0 --- Number of Interface CRC Errors\n |||_ C monitored condition met\n ||__ D supports DSN\n |___ N normalized value\n\nPending Defects log (GP Log 0x0c) not supported\n\nSATA Phy Event Counters (GP Log 0x11)\nID Size Value Description\n0x0001 2 0 Command failed due to ICRC error\n0x0002 2 0 R_ERR response for data FIS\n0x0003 2 0 R_ERR response for device-to-host data FIS\n0x0004 2 0 R_ERR response for host-to-device data FIS\n0x0005 2 0 R_ERR response for non-data FIS\n0x0006 2 0 R_ERR response for device-to-host non-data FIS\n0x0007 2 0 R_ERR response for host-to-device non-data FIS\n0x0008 2 0 Device-to-host non-data FIS retries\n0x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy\n0x000a 2 34 Device-to-host register FISes sent due to a COMRESET\n0x000b 2 0 CRC errors within host-to-device FIS\n0x000d 2 0 Non-CRC errors within host-to-device FIS\n0x000f 2 0 R_ERR response for host-to-device data FIS, CRC\n0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC\n0x8000 4 107919 Vendor specific\n\n\u003c\/pre\u003e","brand":"Robert Elder Software Inc's Store","offers":[{"title":"Default Title","offer_id":52112090530080,"sku":null,"price":175.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/8945\/5392\/files\/PXL_20260804_232939508.MP.jpg?v=1785886876"},{"product_id":"4tb-western-digital-red-plus-used-2312-powered-on-hours","title":"4TB Western Digital Red Plus (Used: 2312 Powered On Hours)","description":"\u003cp\u003eThis is a used 4TB Western Digital Red Plus internal 3.5 5400RPM, 3.5\", SATA III hard drive.\u003c\/p\u003e\n\u003cp\u003eThis drive still works perfectly and it passes multiple passes with badblocks and an extended smart test.  It has ~2312 total hours powered on.  I am selling this drive so I can replace it with a pool of much larger 16TB drives that take up less space.\u003c\/p\u003e\n\u003cp\u003eYou will receive the exact same drive with the serial number shown in the images.  \u003c\/p\u003e\n\u003cp\u003eSince this is a used drive, it is being sold 'as is' and without warranty.   I can personally certify that the output shown below is real and was actually run on this specific drive by me, and also that I ran badblocks tests on this specific drive and found no issues.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eHere is the output from running fdisk -l \/dev\/sdb on this drive:\u003c\/h1\u003e\n\u003cpre\u003eDisk \/dev\/sdb: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors\nDisk model: EFZX-68AWUN0 \nUnits: sectors of 1 * 512 = 512 bytes\nSector size (logical\/physical): 512 bytes \/ 4096 bytes\nI\/O size (minimum\/optimal): 4096 bytes \/ 4096 bytes\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eHere is the output from running hdparm -I \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e \n\n\/dev\/sdb:\n\nATA device, with non-removable media\n\tModel Number: WDC WD40EFZX-68AWUN0 \n\tSerial Number: WD-WX12D6179DC6\n\tFirmware Revision: 81.00B81\n\tTransport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0\nStandards:\n\tUsed: unknown (minor revision code 0x006d) \n\tSupported: 10 9 8 7 6 5 \n\tLikely used: 10\nConfiguration:\n\tLogical\t\tmax\tcurrent\n\tcylinders\t16383\t0\n\theads\t\t16\t0\n\tsectors\/track\t63\t0\n\t--\n\tLBA user addressable sectors: 268435455\n\tLBA48 user addressable sectors: 7814037168\n\tLogical Sector size: 512 bytes\n\tPhysical Sector size: 4096 bytes\n\tLogical Sector-0 offset: 0 bytes\n\tdevice size with M = 1024*1024: 3815447 MBytes\n\tdevice size with M = 1000*1000: 4000787 MBytes (4000 GB)\n\tcache\/buffer size = unknown\n\tForm Factor: 3.5 inch\n\tNominal Media Rotation Rate: 5400\nCapabilities:\n\tLBA, IORDY(can be disabled)\n\tQueue depth: 32\n\tStandby timer values: spec'd by Standard, with device specific minimum\n\tR\/W multiple sector transfer: Max = 16\tCurrent = 16\n\tDMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 \n\t Cycle time: min=120ns recommended=120ns\n\tPIO: pio0 pio1 pio2 pio3 pio4 \n\t Cycle time: no flow control=120ns IORDY flow control=120ns\nCommands\/features:\n\tEnabled\tSupported:\n\t *\tSMART feature set\n\t \tSecurity Mode feature set\n\t *\tPower Management feature set\n\t *\tWrite cache\n\t *\tLook-ahead\n\t *\tWRITE_BUFFER command\n\t *\tREAD_BUFFER command\n\t *\tNOP cmd\n\t *\tDOWNLOAD_MICROCODE\n\t *\t48-bit Address feature set\n\t *\tDevice Configuration Overlay feature set\n\t *\tMandatory FLUSH_CACHE\n\t *\tFLUSH_CACHE_EXT\n\t *\tSMART error logging\n\t *\tSMART self-test\n\t *\tGeneral Purpose Logging feature set\n\t *\t64-bit World wide name\n\t *\tIDLE_IMMEDIATE with UNLOAD\n\t *\tWRITE_UNCORRECTABLE_EXT command\n\t *\t{READ,WRITE}_DMA_EXT_GPL commands\n\t *\tSegmented DOWNLOAD_MICROCODE\n\t *\tGen1 signaling speed (1.5Gb\/s)\n\t *\tGen2 signaling speed (3.0Gb\/s)\n\t *\tGen3 signaling speed (6.0Gb\/s)\n\t *\tNative Command Queueing (NCQ)\n\t *\tHost-initiated interface power management\n\t *\tPhy event counters\n\t *\tIdle-Unload when NCQ is active\n\t *\tNCQ priority information\n\t *\tREAD_LOG_DMA_EXT equivalent to READ_LOG_EXT\n\t \tDevice-initiated interface power management\n\t *\tSoftware settings preservation\n\t *\tSMART Command Transport (SCT) feature set\n\t *\tSCT Write Same (AC2)\n\t *\tSCT Error Recovery Control (AC3)\n\t *\tSCT Features Control (AC4)\n\t *\tSCT Data Tables (AC5)\n\t \tunknown 206[12] (vendor specific)\n\t \tunknown 206[13] (vendor specific)\n\t *\tDOWNLOAD MICROCODE DMA command\n\t *\tWRITE BUFFER DMA command\n\t *\tREAD BUFFER DMA command\nSecurity: \n\tMaster password revision code = 65534\n\t\tsupported\n\tnot\tenabled\n\tnot\tlocked\n\tnot\tfrozen\n\tnot\texpired: security count\n\t\tsupported: enhanced erase\n\t466min for SECURITY ERASE UNIT. 466min for ENHANCED SECURITY ERASE UNIT.\nLogical Unit WWN Device Identifier: 50014ee269ab0669\n\tNAA\t\t: 5\n\tIEEE OUI\t: 0014ee\n\tUnique ID\t: 269ab0669\nChecksum: correct\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eAnd here is the result from running smartctl -x \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cpre\u003e smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-14-generic] (local build)\nCopyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF INFORMATION SECTION ===\nModel Family: Western Digital Red (CMR)\nDevice Model: WDC WD40EFZX-68AWUN0\nSerial Number: WD-WX12D6179DC6\nLU WWN Device Id: 5 0014ee 269ab0669\nFirmware Version: 81.00B81\nUser Capacity: 4,000,787,030,016 bytes [4.00 TB]\nSector Sizes: 512 bytes logical, 4096 bytes physical\nRotation Rate: 5400 rpm\nForm Factor: 3.5 inches\nDevice is: In smartctl database 7.5\/5706\nATA Version is: ACS-3 T13\/2161-D revision 5\nSATA Version is: SATA 3.1, 6.0 Gb\/s (current: 6.0 Gb\/s)\nLocal Time is: Sun Aug 16 22:13:00 2026 UTC\nSMART support is: Available - device has SMART capability.\nSMART support is: Enabled\nAAM feature is: Unavailable\nAPM feature is: Unavailable\nRd look-ahead is: Enabled\nWrite cache is: Enabled\nDSN feature is: Unavailable\nATA Security is: Disabled, NOT FROZEN [SEC1]\n\n=== START OF READ SMART DATA SECTION ===\nSMART Status not supported: Incomplete response, ATA output registers missing\nSMART overall-health self-assessment test result: PASSED\nWarning: This result is based on an Attribute check.\n\nGeneral SMART Values:\nOffline data collection status: (0x00)\tOffline data collection activity\n\t\t\t\t\twas never started.\n\t\t\t\t\tAuto Offline Data Collection: Disabled.\nSelf-test execution status: ( 0)\tThe previous self-test routine completed\n\t\t\t\t\twithout error or no self-test has ever \n\t\t\t\t\tbeen run.\nTotal time to complete Offline \ndata collection: \t\t(42480) seconds.\nOffline data collection\ncapabilities: \t\t\t (0x11) SMART execute Offline immediate.\n\t\t\t\t\tNo Auto Offline data collection support.\n\t\t\t\t\tSuspend Offline collection upon new\n\t\t\t\t\tcommand.\n\t\t\t\t\tNo Offline surface scan supported.\n\t\t\t\t\tSelf-test supported.\n\t\t\t\t\tNo Conveyance Self-test supported.\n\t\t\t\t\tNo Selective Self-test supported.\nSMART capabilities: (0x0003)\tSaves SMART data before entering\n\t\t\t\t\tpower-saving mode.\n\t\t\t\t\tSupports SMART auto save timer.\nError logging capability: (0x01)\tError logging supported.\n\t\t\t\t\tGeneral Purpose Logging supported.\nShort self-test routine \nrecommended polling time: \t ( 2) minutes.\nExtended self-test routine\nrecommended polling time: \t ( 451) minutes.\nSCT capabilities: \t (0x303d)\tSCT Status supported.\n\t\t\t\t\tSCT Error Recovery Control supported.\n\t\t\t\t\tSCT Feature Control supported.\n\t\t\t\t\tSCT Data Table supported.\n\nSMART Attributes Data Structure revision number: 16\nVendor Specific SMART Attributes with Thresholds:\nID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0\n 3 Spin_Up_Time POS--K 235 219 021 - 3208\n 4 Start_Stop_Count -O--CK 100 100 000 - 150\n 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0\n 7 Seek_Error_Rate -OSR-K 200 200 000 - 0\n 9 Power_On_Hours -O--CK 097 097 000 - 2312\n 10 Spin_Retry_Count -O--CK 100 100 000 - 0\n 11 Calibration_Retry_Count -O--CK 100 253 000 - 0\n 12 Power_Cycle_Count -O--CK 100 100 000 - 76\n192 Power-Off_Retract_Count -O--CK 200 200 000 - 8\n193 Load_Cycle_Count -O--CK 200 200 000 - 446\n194 Temperature_Celsius -O---K 113 112 000 - 37\n196 Reallocated_Event_Count -O--CK 200 200 000 - 0\n197 Current_Pending_Sector -O--CK 200 200 000 - 0\n198 Offline_Uncorrectable ----CK 100 253 000 - 0\n199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0\n200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0\n ||||||_ K auto-keep\n |||||__ C event count\n ||||___ R error rate\n |||____ S speed\/performance\n ||_____ O updated online\n |______ P prefailure warning\n\nGeneral Purpose Log Directory Version 1\nSMART Log Directory Version 1 [multi-sector log support]\nAddress Access R\/W Size Description\n0x00 GPL,SL R\/O 1 Log Directory\n0x01 SL R\/O 1 Summary SMART error log\n0x02 SL R\/O 5 Comprehensive SMART error log\n0x03 GPL R\/O 6 Ext. Comprehensive SMART error log\n0x04 GPL,SL R\/O 8 Device Statistics log\n0x06 SL R\/O 1 SMART self-test log\n0x07 GPL R\/O 1 Extended self-test log\n0x09 SL R\/W 1 Selective self-test log\n0x10 GPL R\/O 1 NCQ Command Error log\n0x11 GPL R\/O 1 SATA Phy Event Counters log\n0x30 GPL,SL R\/O 9 IDENTIFY DEVICE data log\n0x80-0x9f GPL,SL R\/W 16 Host vendor specific log\n0xa0-0xa7 GPL,SL VS 16 Device vendor specific log\n0xa8-0xb6 GPL,SL VS 1 Device vendor specific log\n0xb7 GPL,SL VS 78 Device vendor specific log\n0xbd GPL,SL VS 1 Device vendor specific log\n0xc0 GPL,SL VS 1 Device vendor specific log\n0xc1 GPL VS 93 Device vendor specific log\n0xe0 GPL,SL R\/W 1 SCT Command\/Status\n0xe1 GPL,SL R\/W 1 SCT Data Transfer\n\nSMART Extended Comprehensive Error Log Version: 1 (6 sectors)\nNo Errors Logged\n\nSMART Extended Self-test Log Version: 1 (1 sectors)\nNum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n# 1 Extended offline Completed without error 00% 2311 -\n\nSelective Self-tests\/Logging not supported\n\nSCT Status Version: 3\nSCT Version (vendor specific): 258 (0x0102)\nDevice State: Active (0)\nCurrent Temperature: 37 Celsius\nPower Cycle Min\/Max Temperature: 28\/38 Celsius\nLifetime Min\/Max Temperature: 18\/39 Celsius\nUnder\/Over Temperature Limit Count: 0\/0\nVendor specific:\n01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n\nSCT Temperature History Version: 2\nTemperature Sampling Period: 1 minute\nTemperature Logging Interval: 1 minute\nMin\/Max recommended Temperature: 0\/65 Celsius\nMin\/Max Temperature Limit: -41\/85 Celsius\nTemperature History Size (Index): 478 (228)\n\nIndex Estimated Time Temperature Celsius\n 229 2026-08-16 14:16 36 *****************\n ... ..( 94 skipped). .. *****************\n 324 2026-08-16 15:51 36 *****************\n 325 2026-08-16 15:52 37 ******************\n ... ..( 2 skipped). .. ******************\n 328 2026-08-16 15:55 37 ******************\n 329 2026-08-16 15:56 35 ****************\n ... ..( 50 skipped). .. ****************\n 380 2026-08-16 16:47 35 ****************\n 381 2026-08-16 16:48 36 *****************\n ... ..(324 skipped). .. *****************\n 228 2026-08-16 22:13 36 *****************\n\nSMART WRITE LOG does not return COUNT and LBA_LOW register\nSCT (Get) Error Recovery Control command failed\n\nDevice Statistics (GP Log 0x04)\nPage Offset Size Value Flags Description\n0x01 ===== = = === == General Statistics (rev 1) ==\n0x01 0x008 4 76 --- Lifetime Power-On Resets\n0x01 0x010 4 2312 --- Power-on Hours\n0x01 0x018 6 89545274179 --- Logical Sectors Written\n0x01 0x020 6 597725133 --- Number of Write Commands\n0x01 0x028 6 146715718148 --- Logical Sectors Read\n0x01 0x030 6 1584470038 --- Number of Read Commands\n0x01 0x038 6 4028232704 --- Date and Time TimeStamp\n0x03 ===== = = === == Rotating Media Statistics (rev 1) ==\n0x03 0x008 4 2301 --- Spindle Motor Power-on Hours\n0x03 0x010 4 1638 --- Head Flying Hours\n0x03 0x018 4 455 --- Head Load Events\n0x03 0x020 4 0 --- Number of Reallocated Logical Sectors\n0x03 0x028 4 0 --- Read Recovery Attempts\n0x03 0x030 4 0 --- Number of Mechanical Start Failures\n0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors\n0x03 0x040 4 8 --- Number of High Priority Unload Events\n0x04 ===== = = === == General Errors Statistics (rev 1) ==\n0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors\n0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion\n0x05 ===== = = === == Temperature Statistics (rev 1) ==\n0x05 0x008 1 37 --- Current Temperature\n0x05 0x010 1 35 --- Average Short Term Temperature\n0x05 0x018 1 31 --- Average Long Term Temperature\n0x05 0x020 1 39 --- Highest Temperature\n0x05 0x028 1 21 --- Lowest Temperature\n0x05 0x030 1 37 --- Highest Average Short Term Temperature\n0x05 0x038 1 26 --- Lowest Average Short Term Temperature\n0x05 0x040 1 33 --- Highest Average Long Term Temperature\n0x05 0x048 1 30 --- Lowest Average Long Term Temperature\n0x05 0x050 4 0 --- Time in Over-Temperature\n0x05 0x058 1 65 --- Specified Maximum Operating Temperature\n0x05 0x060 4 0 --- Time in Under-Temperature\n0x05 0x068 1 0 --- Specified Minimum Operating Temperature\n0x06 ===== = = === == Transport Statistics (rev 1) ==\n0x06 0x008 4 1195 --- Number of Hardware Resets\n0x06 0x010 4 781 --- Number of ASR Events\n0x06 0x018 4 0 --- Number of Interface CRC Errors\n |||_ C monitored condition met\n ||__ D supports DSN\n |___ N normalized value\n\nPending Defects log (GP Log 0x0c) not supported\n\nSATA Phy Event Counters (GP Log 0x11)\nID Size Value Description\n0x0001 2 0 Command failed due to ICRC error\n0x0002 2 0 R_ERR response for data FIS\n0x0003 2 0 R_ERR response for device-to-host data FIS\n0x0004 2 0 R_ERR response for host-to-device data FIS\n0x0005 2 0 R_ERR response for non-data FIS\n0x0006 2 0 R_ERR response for device-to-host non-data FIS\n0x0007 2 0 R_ERR response for host-to-device non-data FIS\n0x0008 2 0 Device-to-host non-data FIS retries\n0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy\n0x000a 2 4 Device-to-host register FISes sent due to a COMRESET\n0x000b 2 0 CRC errors within host-to-device FIS\n0x000d 2 0 Non-CRC errors within host-to-device FIS\n0x000f 2 0 R_ERR response for host-to-device data FIS, CRC\n0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC\n0x8000 4 236181 Vendor specific\n\n\n\u003c\/pre\u003e","brand":"Robert Elder Software Inc's Store","offers":[{"title":"Default Title","offer_id":52200095121696,"sku":null,"price":185.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/8945\/5392\/files\/PXL_20260817_210743110_cfa6ec2c-88d0-4216-8578-6c7705781703.jpg?v=1787002724"},{"product_id":"4tb-western-digital-red-plus-used-1439-powered-on-hours","title":"4TB Western Digital Red Plus (Used: 1439 Powered On Hours)","description":"\u003cp\u003eThis is a used 4TB Western Digital Red Plus internal 3.5 5400RPM, 3.5\", SATA III hard drive.\u003c\/p\u003e\n\u003cp\u003eThis drive still works perfectly and it passes multiple passes with badblocks and an extended smart test.  It has ~1439 total hours powered on.  I am selling this drive so I can replace it with a pool of much larger 16TB drives that take up less space.\u003c\/p\u003e\n\u003cp\u003eYou will receive the exact same drive with the serial number shown in the images.  \u003c\/p\u003e\n\u003cp\u003eSince this is a used drive, it is being sold 'as is' and without warranty.   I can personally certify that the output shown below is real and was actually run on this specific drive by me, and also that I ran badblocks tests on this specific drive and found no issues.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003eHere is the output from running fdisk -l \/dev\/sdb on this drive:\u003c\/h1\u003e\n\u003cpre\u003e\nDisk \/dev\/sdb: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors\nDisk model: EFZX-68AWUN0 \nUnits: sectors of 1 * 512 = 512 bytes\nSector size (logical\/physical): 512 bytes \/ 4096 bytes\nI\/O size (minimum\/optimal): 4096 bytes \/ 4096 bytes\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eHere is the output from running hdparm -I \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e \n \n\/dev\/sdb:\n\nATA device, with non-removable media\n\tModel Number: WDC WD40EFZX-68AWUN0 \n\tSerial Number: WD-WX52D91LE1RN\n\tFirmware Revision: 81.00B81\n\tTransport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0\nStandards:\n\tUsed: unknown (minor revision code 0x006d) \n\tSupported: 10 9 8 7 6 5 \n\tLikely used: 10\nConfiguration:\n\tLogical\t\tmax\tcurrent\n\tcylinders\t16383\t0\n\theads\t\t16\t0\n\tsectors\/track\t63\t0\n\t--\n\tLBA user addressable sectors: 268435455\n\tLBA48 user addressable sectors: 7814037168\n\tLogical Sector size: 512 bytes\n\tPhysical Sector size: 4096 bytes\n\tLogical Sector-0 offset: 0 bytes\n\tdevice size with M = 1024*1024: 3815447 MBytes\n\tdevice size with M = 1000*1000: 4000787 MBytes (4000 GB)\n\tcache\/buffer size = unknown\n\tForm Factor: 3.5 inch\n\tNominal Media Rotation Rate: 5400\nCapabilities:\n\tLBA, IORDY(can be disabled)\n\tQueue depth: 32\n\tStandby timer values: spec'd by Standard, with device specific minimum\n\tR\/W multiple sector transfer: Max = 16\tCurrent = 16\n\tDMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 \n\t Cycle time: min=120ns recommended=120ns\n\tPIO: pio0 pio1 pio2 pio3 pio4 \n\t Cycle time: no flow control=120ns IORDY flow control=120ns\nCommands\/features:\n\tEnabled\tSupported:\n\t *\tSMART feature set\n\t \tSecurity Mode feature set\n\t *\tPower Management feature set\n\t *\tWrite cache\n\t *\tLook-ahead\n\t *\tWRITE_BUFFER command\n\t *\tREAD_BUFFER command\n\t *\tNOP cmd\n\t *\tDOWNLOAD_MICROCODE\n\t *\t48-bit Address feature set\n\t *\tDevice Configuration Overlay feature set\n\t *\tMandatory FLUSH_CACHE\n\t *\tFLUSH_CACHE_EXT\n\t *\tSMART error logging\n\t *\tSMART self-test\n\t *\tGeneral Purpose Logging feature set\n\t *\t64-bit World wide name\n\t *\tIDLE_IMMEDIATE with UNLOAD\n\t *\tWRITE_UNCORRECTABLE_EXT command\n\t *\t{READ,WRITE}_DMA_EXT_GPL commands\n\t *\tSegmented DOWNLOAD_MICROCODE\n\t *\tGen1 signaling speed (1.5Gb\/s)\n\t *\tGen2 signaling speed (3.0Gb\/s)\n\t *\tGen3 signaling speed (6.0Gb\/s)\n\t *\tNative Command Queueing (NCQ)\n\t *\tHost-initiated interface power management\n\t *\tPhy event counters\n\t *\tIdle-Unload when NCQ is active\n\t *\tNCQ priority information\n\t *\tREAD_LOG_DMA_EXT equivalent to READ_LOG_EXT\n\t \tDevice-initiated interface power management\n\t *\tSoftware settings preservation\n\t *\tSMART Command Transport (SCT) feature set\n\t *\tSCT Write Same (AC2)\n\t *\tSCT Error Recovery Control (AC3)\n\t *\tSCT Features Control (AC4)\n\t *\tSCT Data Tables (AC5)\n\t \tunknown 206[12] (vendor specific)\n\t \tunknown 206[13] (vendor specific)\n\t *\tDOWNLOAD MICROCODE DMA command\n\t *\tWRITE BUFFER DMA command\n\t *\tREAD BUFFER DMA command\nSecurity: \n\tMaster password revision code = 65534\n\t\tsupported\n\tnot\tenabled\n\tnot\tlocked\n\tnot\tfrozen\n\tnot\texpired: security count\n\t\tsupported: enhanced erase\n\t450min for SECURITY ERASE UNIT. 450min for ENHANCED SECURITY ERASE UNIT.\nLogical Unit WWN Device Identifier: 50014ee269f157e4\n\tNAA\t\t: 5\n\tIEEE OUI\t: 0014ee\n\tUnique ID\t: 269f157e4\nChecksum: correct\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eAnd here is the result from running smartctl -x \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cpre\u003e\n smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-14-generic] (local build)\nCopyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF INFORMATION SECTION ===\nModel Family: Western Digital Red (CMR)\nDevice Model: WDC WD40EFZX-68AWUN0\nSerial Number: WD-WX52D91LE1RN\nLU WWN Device Id: 5 0014ee 269f157e4\nFirmware Version: 81.00B81\nUser Capacity: 4,000,787,030,016 bytes [4.00 TB]\nSector Sizes: 512 bytes logical, 4096 bytes physical\nRotation Rate: 5400 rpm\nForm Factor: 3.5 inches\nDevice is: In smartctl database 7.5\/5706\nATA Version is: ACS-3 T13\/2161-D revision 5\nSATA Version is: SATA 3.1, 6.0 Gb\/s (current: 6.0 Gb\/s)\nLocal Time is: Fri Aug 21 20:07:49 2026 UTC\nSMART support is: Available - device has SMART capability.\nSMART support is: Enabled\nAAM feature is: Unavailable\nAPM feature is: Unavailable\nRd look-ahead is: Enabled\nWrite cache is: Enabled\nDSN feature is: Unavailable\nATA Security is: Disabled, NOT FROZEN [SEC1]\n\n=== START OF READ SMART DATA SECTION ===\nSMART Status not supported: Incomplete response, ATA output registers missing\nSMART overall-health self-assessment test result: PASSED\nWarning: This result is based on an Attribute check.\n\nGeneral SMART Values:\nOffline data collection status: (0x00)\tOffline data collection activity\n\t\t\t\t\twas never started.\n\t\t\t\t\tAuto Offline Data Collection: Disabled.\nSelf-test execution status: ( 0)\tThe previous self-test routine completed\n\t\t\t\t\twithout error or no self-test has ever \n\t\t\t\t\tbeen run.\nTotal time to complete Offline \ndata collection: \t\t(41040) seconds.\nOffline data collection\ncapabilities: \t\t\t (0x11) SMART execute Offline immediate.\n\t\t\t\t\tNo Auto Offline data collection support.\n\t\t\t\t\tSuspend Offline collection upon new\n\t\t\t\t\tcommand.\n\t\t\t\t\tNo Offline surface scan supported.\n\t\t\t\t\tSelf-test supported.\n\t\t\t\t\tNo Conveyance Self-test supported.\n\t\t\t\t\tNo Selective Self-test supported.\nSMART capabilities: (0x0003)\tSaves SMART data before entering\n\t\t\t\t\tpower-saving mode.\n\t\t\t\t\tSupports SMART auto save timer.\nError logging capability: (0x01)\tError logging supported.\n\t\t\t\t\tGeneral Purpose Logging supported.\nShort self-test routine \nrecommended polling time: \t ( 2) minutes.\nExtended self-test routine\nrecommended polling time: \t ( 436) minutes.\nSCT capabilities: \t (0x303d)\tSCT Status supported.\n\t\t\t\t\tSCT Error Recovery Control supported.\n\t\t\t\t\tSCT Feature Control supported.\n\t\t\t\t\tSCT Data Table supported.\n\nSMART Attributes Data Structure revision number: 16\nVendor Specific SMART Attributes with Thresholds:\nID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0\n 3 Spin_Up_Time POS--K 234 225 021 - 3291\n 4 Start_Stop_Count -O--CK 100 100 000 - 91\n 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0\n 7 Seek_Error_Rate -OSR-K 200 200 000 - 0\n 9 Power_On_Hours -O--CK 099 099 000 - 1439\n 10 Spin_Retry_Count -O--CK 100 253 000 - 0\n 11 Calibration_Retry_Count -O--CK 100 253 000 - 0\n 12 Power_Cycle_Count -O--CK 100 100 000 - 88\n192 Power-Off_Retract_Count -O--CK 200 200 000 - 36\n193 Load_Cycle_Count -O--CK 200 200 000 - 322\n194 Temperature_Celsius -O---K 112 108 000 - 38\n196 Reallocated_Event_Count -O--CK 200 200 000 - 0\n197 Current_Pending_Sector -O--CK 200 200 000 - 0\n198 Offline_Uncorrectable ----CK 100 253 000 - 0\n199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0\n200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0\n ||||||_ K auto-keep\n |||||__ C event count\n ||||___ R error rate\n |||____ S speed\/performance\n ||_____ O updated online\n |______ P prefailure warning\n\nGeneral Purpose Log Directory Version 1\nSMART Log Directory Version 1 [multi-sector log support]\nAddress Access R\/W Size Description\n0x00 GPL,SL R\/O 1 Log Directory\n0x01 SL R\/O 1 Summary SMART error log\n0x02 SL R\/O 5 Comprehensive SMART error log\n0x03 GPL R\/O 6 Ext. Comprehensive SMART error log\n0x04 GPL,SL R\/O 8 Device Statistics log\n0x06 SL R\/O 1 SMART self-test log\n0x07 GPL R\/O 1 Extended self-test log\n0x09 SL R\/W 1 Selective self-test log\n0x10 GPL R\/O 1 NCQ Command Error log\n0x11 GPL R\/O 1 SATA Phy Event Counters log\n0x30 GPL,SL R\/O 9 IDENTIFY DEVICE data log\n0x80-0x9f GPL,SL R\/W 16 Host vendor specific log\n0xa0-0xa7 GPL,SL VS 16 Device vendor specific log\n0xa8-0xb6 GPL,SL VS 1 Device vendor specific log\n0xb7 GPL,SL VS 78 Device vendor specific log\n0xbd GPL,SL VS 1 Device vendor specific log\n0xc0 GPL,SL VS 1 Device vendor specific log\n0xc1 GPL VS 93 Device vendor specific log\n0xe0 GPL,SL R\/W 1 SCT Command\/Status\n0xe1 GPL,SL R\/W 1 SCT Data Transfer\n\nSMART Extended Comprehensive Error Log Version: 1 (6 sectors)\nNo Errors Logged\n\nSMART Extended Self-test Log Version: 1 (1 sectors)\nNum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n# 1 Extended offline Completed without error 00% 1439 -\n\nSelective Self-tests\/Logging not supported\n\nSCT Status Version: 3\nSCT Version (vendor specific): 258 (0x0102)\nDevice State: Active (0)\nCurrent Temperature: 38 Celsius\nPower Cycle Min\/Max Temperature: 22\/40 Celsius\nLifetime Min\/Max Temperature: 18\/42 Celsius\nUnder\/Over Temperature Limit Count: 0\/0\nVendor specific:\n01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n\nSCT Temperature History Version: 2\nTemperature Sampling Period: 1 minute\nTemperature Logging Interval: 1 minute\nMin\/Max recommended Temperature: 0\/65 Celsius\nMin\/Max Temperature Limit: -41\/85 Celsius\nTemperature History Size (Index): 478 (358)\n\nIndex Estimated Time Temperature Celsius\n 359 2026-08-21 12:10 38 *******************\n ... ..( 33 skipped). .. *******************\n 393 2026-08-21 12:44 38 *******************\n 394 2026-08-21 12:45 39 ********************\n 395 2026-08-21 12:46 39 ********************\n 396 2026-08-21 12:47 39 ********************\n 397 2026-08-21 12:48 40 *********************\n ... ..( 2 skipped). .. *********************\n 400 2026-08-21 12:51 40 *********************\n 401 2026-08-21 12:52 39 ********************\n ... ..( 2 skipped). .. ********************\n 404 2026-08-21 12:55 39 ********************\n 405 2026-08-21 12:56 38 *******************\n ... ..( 2 skipped). .. *******************\n 408 2026-08-21 12:59 38 *******************\n 409 2026-08-21 13:00 36 *****************\n ... ..( 25 skipped). .. *****************\n 435 2026-08-21 13:26 36 *****************\n 436 2026-08-21 13:27 35 ****************\n ... ..( 4 skipped). .. ****************\n 441 2026-08-21 13:32 35 ****************\n 442 2026-08-21 13:33 34 ***************\n ... ..( 12 skipped). .. ***************\n 455 2026-08-21 13:46 34 ***************\n 456 2026-08-21 13:47 35 ****************\n ... ..( 6 skipped). .. ****************\n 463 2026-08-21 13:54 35 ****************\n 464 2026-08-21 13:55 36 *****************\n ... ..( 11 skipped). .. *****************\n 476 2026-08-21 14:07 36 *****************\n 477 2026-08-21 14:08 37 ******************\n ... ..( 59 skipped). .. ******************\n 59 2026-08-21 15:08 37 ******************\n 60 2026-08-21 15:09 38 *******************\n ... ..(297 skipped). .. *******************\n 358 2026-08-21 20:07 38 *******************\n\nSMART WRITE LOG does not return COUNT and LBA_LOW register\nSCT (Get) Error Recovery Control command failed\n\nDevice Statistics (GP Log 0x04)\nPage Offset Size Value Flags Description\n0x01 ===== = = === == General Statistics (rev 1) ==\n0x01 0x008 4 88 --- Lifetime Power-On Resets\n0x01 0x010 4 1439 --- Power-on Hours\n0x01 0x018 6 74696122369 --- Logical Sectors Written\n0x01 0x020 6 505376570 --- Number of Write Commands\n0x01 0x028 6 120778542447 --- Logical Sectors Read\n0x01 0x030 6 588115982 --- Number of Read Commands\n0x01 0x038 6 885432704 --- Date and Time TimeStamp\n0x03 ===== = = === == Rotating Media Statistics (rev 1) ==\n0x03 0x008 4 1435 --- Spindle Motor Power-on Hours\n0x03 0x010 4 878 --- Head Flying Hours\n0x03 0x018 4 359 --- Head Load Events\n0x03 0x020 4 0 --- Number of Reallocated Logical Sectors\n0x03 0x028 4 0 --- Read Recovery Attempts\n0x03 0x030 4 0 --- Number of Mechanical Start Failures\n0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors\n0x03 0x040 4 36 --- Number of High Priority Unload Events\n0x04 ===== = = === == General Errors Statistics (rev 1) ==\n0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors\n0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion\n0x05 ===== = = === == Temperature Statistics (rev 1) ==\n0x05 0x008 1 38 --- Current Temperature\n0x05 0x010 1 37 --- Average Short Term Temperature\n0x05 0x018 1 34 --- Average Long Term Temperature\n0x05 0x020 1 42 --- Highest Temperature\n0x05 0x028 1 21 --- Lowest Temperature\n0x05 0x030 1 40 --- Highest Average Short Term Temperature\n0x05 0x038 1 29 --- Lowest Average Short Term Temperature\n0x05 0x040 1 34 --- Highest Average Long Term Temperature\n0x05 0x048 1 32 --- Lowest Average Long Term Temperature\n0x05 0x050 4 0 --- Time in Over-Temperature\n0x05 0x058 1 65 --- Specified Maximum Operating Temperature\n0x05 0x060 4 0 --- Time in Under-Temperature\n0x05 0x068 1 0 --- Specified Minimum Operating Temperature\n0x06 ===== = = === == Transport Statistics (rev 1) ==\n0x06 0x008 4 423 --- Number of Hardware Resets\n0x06 0x010 4 110 --- Number of ASR Events\n0x06 0x018 4 0 --- Number of Interface CRC Errors\n |||_ C monitored condition met\n ||__ D supports DSN\n |___ N normalized value\n\nPending Defects log (GP Log 0x0c) not supported\n\nSATA Phy Event Counters (GP Log 0x11)\nID Size Value Description\n0x0001 2 0 Command failed due to ICRC error\n0x0002 2 0 R_ERR response for data FIS\n0x0003 2 0 R_ERR response for device-to-host data FIS\n0x0004 2 0 R_ERR response for host-to-device data FIS\n0x0005 2 0 R_ERR response for non-data FIS\n0x0006 2 0 R_ERR response for device-to-host non-data FIS\n0x0007 2 0 R_ERR response for host-to-device non-data FIS\n0x0008 2 0 Device-to-host non-data FIS retries\n0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy\n0x000a 2 9 Device-to-host register FISes sent due to a COMRESET\n0x000b 2 0 CRC errors within host-to-device FIS\n0x000d 2 0 Non-CRC errors within host-to-device FIS\n0x000f 2 0 R_ERR response for host-to-device data FIS, CRC\n0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC\n0x8000 4 282373 Vendor specific\n\n\u003c\/pre\u003e","brand":"Robert Elder Software Inc's Store","offers":[{"title":"Default Title","offer_id":52247679140128,"sku":null,"price":190.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/8945\/5392\/files\/PXL_20260825_204231494.jpg?v=1787699515"},{"product_id":"4tb-western-digital-red-plus-used-1439-powered-on-hours-copy","title":"4TB Seagate IronWolf NAS Hard Drive (2709 Powered On Hours)","description":"\u003cp\u003eThis is a used Seagate IronWolf 4TB NAS Hard Drive 5900 RPM 64MB Cache SATA 6.0Gb\/s CMR 3.5\" Internal HDD.\u003c\/p\u003e\n\u003cp\u003eThis drive still works perfectly and it passes multiple passes with badblocks and an extended smart test.  It has ~2709 total hours powered on.  I am selling this drive so I can replace it with a pool of much larger 16TB drives that take up less space.\u003c\/p\u003e\n\u003cp\u003eYou will receive the exact same drive with the serial number shown in the images.  \u003c\/p\u003e\n\u003cp\u003eSince this is a used drive, it is being sold 'as is' and without warranty.   I can personally certify that the output shown below is real and was actually run on this specific drive by me, and also that I ran badblocks tests on this specific drive and found no issues.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003eHere is the output from running fdisk -l \/dev\/sdb on this drive:\u003c\/h1\u003e\n\u003cpre\u003eDisk \/dev\/sdb: 3.64 TiB, 4000787030016 bytes, 7814037168 sectors\nDisk model: 008-2DR166 \nUnits: sectors of 1 * 512 = 512 bytes\nSector size (logical\/physical): 512 bytes \/ 4096 bytes\nI\/O size (minimum\/optimal): 4096 bytes \/ 4096 bytes\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eHere is the output from running hdparm -I \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e\/dev\/sdb:\n\nATA device, with non-removable media\n\tModel Number: ST4000VN008-2DR166 \n\tSerial Number: ZGY9ZXQL\n\tFirmware Revision: SC60 \n\tTransport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0\nStandards:\n\tUsed: unknown (minor revision code 0x006d) \n\tSupported: 10 9 8 7 6 5 \n\tLikely used: 10\nConfiguration:\n\tLogical\t\tmax\tcurrent\n\tcylinders\t16383\t16383\n\theads\t\t16\t16\n\tsectors\/track\t63\t63\n\t--\n\tCHS current addressable sectors: 16514064\n\tLBA user addressable sectors: 268435455\n\tLBA48 user addressable sectors: 7814037168\n\tLogical Sector size: 512 bytes\n\tPhysical Sector size: 4096 bytes\n\tLogical Sector-0 offset: 0 bytes\n\tdevice size with M = 1024*1024: 3815447 MBytes\n\tdevice size with M = 1000*1000: 4000787 MBytes (4000 GB)\n\tcache\/buffer size = 8192 KBytes\n\tForm Factor: 3.5 inch\n\tNominal Media Rotation Rate: 5980\nCapabilities:\n\tLBA, IORDY(can be disabled)\n\tQueue depth: 32\n\tStandby timer values: spec'd by Standard, no device specific minimum\n\tR\/W multiple sector transfer: Max = 16\tCurrent = ?\n\tAdvanced power management level: 128\n\tRecommended acoustic management value: 254, current value: 0\n\tDMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 \n\t Cycle time: min=120ns recommended=120ns\n\tPIO: pio0 pio1 pio2 pio3 pio4 \n\t Cycle time: no flow control=120ns IORDY flow control=120ns\nCommands\/features:\n\tEnabled\tSupported:\n\t *\tSMART feature set\n\t \tSecurity Mode feature set\n\t *\tPower Management feature set\n\t *\tWrite cache\n\t *\tLook-ahead\n\t *\tHost Protected Area feature set\n\t *\tWRITE_BUFFER command\n\t *\tREAD_BUFFER command\n\t *\tDOWNLOAD_MICROCODE\n\t *\tAdvanced Power Management feature set\n\t \tPower-Up In Standby feature set\n\t *\tSET_FEATURES required to spinup after power up\n\t \tSET_MAX security extension\n\t *\t48-bit Address feature set\n\t *\tDevice Configuration Overlay feature set\n\t *\tMandatory FLUSH_CACHE\n\t *\tFLUSH_CACHE_EXT\n\t *\tSMART error logging\n\t *\tSMART self-test\n\t *\tMedia Card Pass-Through\n\t *\tGeneral Purpose Logging feature set\n\t *\tWRITE_{DMA|MULTIPLE}_FUA_EXT\n\t *\t64-bit World wide name\n\t *\tIDLE_IMMEDIATE with UNLOAD\n\t \tWrite-Read-Verify feature set\n\t *\tWRITE_UNCORRECTABLE_EXT command\n\t *\t{READ,WRITE}_DMA_EXT_GPL commands\n\t *\tSegmented DOWNLOAD_MICROCODE\n\t \tunknown 119[6]\n\t *\tGen1 signaling speed (1.5Gb\/s)\n\t *\tGen2 signaling speed (3.0Gb\/s)\n\t *\tGen3 signaling speed (6.0Gb\/s)\n\t *\tNative Command Queueing (NCQ)\n\t *\tPhy event counters\n\t *\tIdle-Unload when NCQ is active\n\t *\tREAD_LOG_DMA_EXT equivalent to READ_LOG_EXT\n\t \tDMA Setup Auto-Activate optimization\n\t \tDevice-initiated interface power management\n\t *\tSoftware settings preservation\n\t \tunknown 78[7]\n\t \tunknown 78[11]\n\t *\tSMART Command Transport (SCT) feature set\n\t *\tSCT Write Same (AC2)\n\t *\tSCT Error Recovery Control (AC3)\n\t *\tSCT Features Control (AC4)\n\t *\tSCT Data Tables (AC5)\n\t \tunknown 206[7]\n\t \tunknown 206[12] (vendor specific)\n\t \tunknown 206[14] (vendor specific)\n\t *\tSANITIZE_ANTIFREEZE_LOCK_EXT command\n\t *\tSANITIZE feature set\n\t *\tOVERWRITE_EXT command\n\t *\tDOWNLOAD MICROCODE DMA command\nSecurity: \n\tMaster password revision code = 65534\n\t\tsupported\n\tnot\tenabled\n\tnot\tlocked\n\tnot\tfrozen\n\tnot\texpired: security count\n\t\tsupported: enhanced erase\n\t428min for SECURITY ERASE UNIT. 428min for ENHANCED SECURITY ERASE UNIT.\nLogical Unit WWN Device Identifier: 5000c500dd03f7f5\n\tNAA\t\t: 5\n\tIEEE OUI\t: 000c50\n\tUnique ID\t: 0dd03f7f5\nChecksum: correct\n\u003c\/pre\u003e\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eAnd here is the result from running smartctl -x \/dev\/sdb on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003esmartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-30-generic] (local build)\nCopyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF INFORMATION SECTION ===\nModel Family: Seagate IronWolf\nDevice Model: ST4000VN008-2DR166\nSerial Number: ZGY9ZXQL\nLU WWN Device Id: 5 000c50 0dd03f7f5\nFirmware Version: SC60\nUser Capacity: 4,000,787,030,016 bytes [4.00 TB]\nSector Sizes: 512 bytes logical, 4096 bytes physical\nRotation Rate: 5980 rpm\nForm Factor: 3.5 inches\nDevice is: In smartctl database 7.5\/5706\nATA Version is: ACS-3 T13\/2161-D revision 5\nSATA Version is: SATA 3.1, 6.0 Gb\/s (current: 6.0 Gb\/s)\nLocal Time is: Fri Aug 28 13:54:35 2026 UTC\nSMART support is: Available - device has SMART capability.\nSMART support is: Enabled\nAAM feature is: Unavailable\nAPM level is: 128 (minimum power consumption without standby)\nRd look-ahead is: Enabled\nWrite cache is: Enabled\nDSN feature is: Unavailable\nATA Security is: Disabled, NOT FROZEN [SEC1]\n\n=== START OF READ SMART DATA SECTION ===\nSMART Status not supported: Incomplete response, ATA output registers missing\nSMART overall-health self-assessment test result: PASSED\nWarning: This result is based on an Attribute check.\n\nGeneral SMART Values:\nOffline data collection status: (0x00)\tOffline data collection activity\n\t\t\t\t\twas never started.\n\t\t\t\t\tAuto Offline Data Collection: Disabled.\nSelf-test execution status: ( 0)\tThe previous self-test routine completed\n\t\t\t\t\twithout error or no self-test has ever \n\t\t\t\t\tbeen run.\nTotal time to complete Offline \ndata collection: \t\t( 581) seconds.\nOffline data collection\ncapabilities: \t\t\t (0x73) SMART execute Offline immediate.\n\t\t\t\t\tAuto Offline data collection on\/off support.\n\t\t\t\t\tSuspend Offline collection upon new\n\t\t\t\t\tcommand.\n\t\t\t\t\tNo Offline surface scan supported.\n\t\t\t\t\tSelf-test supported.\n\t\t\t\t\tConveyance Self-test supported.\n\t\t\t\t\tSelective Self-test supported.\nSMART capabilities: (0x0003)\tSaves SMART data before entering\n\t\t\t\t\tpower-saving mode.\n\t\t\t\t\tSupports SMART auto save timer.\nError logging capability: (0x01)\tError logging supported.\n\t\t\t\t\tGeneral Purpose Logging supported.\nShort self-test routine \nrecommended polling time: \t ( 1) minutes.\nExtended self-test routine\nrecommended polling time: \t ( 594) minutes.\nConveyance self-test routine\nrecommended polling time: \t ( 2) minutes.\nSCT capabilities: \t (0x50bd)\tSCT Status supported.\n\t\t\t\t\tSCT Error Recovery Control supported.\n\t\t\t\t\tSCT Feature Control supported.\n\t\t\t\t\tSCT Data Table supported.\n\nSMART Attributes Data Structure revision number: 10\nVendor Specific SMART Attributes with Thresholds:\nID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n 1 Raw_Read_Error_Rate POSR-- 100 064 044 - 0\n 3 Spin_Up_Time PO---- 094 094 000 - 0\n 4 Start_Stop_Count -O--CK 100 100 020 - 476\n 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0\n 7 Seek_Error_Rate POSR-- 084 060 045 - 278000070\n 9 Power_On_Hours -O--CK 097 097 000 - 2709 (125 170 0)\n 10 Spin_Retry_Count PO--C- 100 100 097 - 0\n 12 Power_Cycle_Count -O--CK 100 100 020 - 93\n184 End-to-End_Error -O--CK 100 100 099 - 0\n187 Reported_Uncorrect -O--CK 100 100 000 - 0\n188 Command_Timeout -O--CK 100 099 000 - 0 0 1\n189 High_Fly_Writes -O-RCK 100 100 000 - 0\n190 Airflow_Temperature_Cel -O---K 070 062 040 - 30 (Min\/Max 23\/37)\n191 G-Sense_Error_Rate -O--CK 100 100 000 - 0\n192 Power-Off_Retract_Count -O--CK 100 100 000 - 491\n193 Load_Cycle_Count -O--CK 097 097 000 - 6094\n194 Temperature_Celsius -O---K 030 040 000 - 30 (0 17 0 0 0)\n197 Current_Pending_Sector -O--C- 100 100 000 - 0\n198 Offline_Uncorrectable ----C- 100 100 000 - 0\n199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0\n240 Head_Flying_Hours ------ 100 253 000 - 1773h+15m+11.077s\n241 Total_LBAs_Written ------ 100 253 000 - 135902946113\n242 Total_LBAs_Read ------ 100 253 000 - 213060568360\n ||||||_ K auto-keep\n |||||__ C event count\n ||||___ R error rate\n |||____ S speed\/performance\n ||_____ O updated online\n |______ P prefailure warning\n\nGeneral Purpose Log Directory Version 1\nSMART Log Directory Version 1 [multi-sector log support]\nAddress Access R\/W Size Description\n0x00 GPL,SL R\/O 1 Log Directory\n0x01 SL R\/O 1 Summary SMART error log\n0x02 SL R\/O 5 Comprehensive SMART error log\n0x03 GPL R\/O 5 Ext. Comprehensive SMART error log\n0x04 GPL,SL R\/O 8 Device Statistics log\n0x06 SL R\/O 1 SMART self-test log\n0x07 GPL R\/O 1 Extended self-test log\n0x09 SL R\/W 1 Selective self-test log\n0x10 GPL R\/O 1 NCQ Command Error log\n0x11 GPL R\/O 1 SATA Phy Event Counters log\n0x13 GPL R\/O 1 SATA NCQ Send and Receive log\n0x15 GPL R\/W 1 Rebuild Assist log\n0x21 GPL R\/O 1 Write stream error log\n0x22 GPL R\/O 1 Read stream error log\n0x24 GPL R\/O 512 Current Device Internal Status Data log\n0x30 GPL,SL R\/O 9 IDENTIFY DEVICE data log\n0x80-0x9f GPL,SL R\/W 16 Host vendor specific log\n0xa1 GPL,SL VS 24 Device vendor specific log\n0xa2 GPL VS 8160 Device vendor specific log\n0xa6 GPL VS 192 Device vendor specific log\n0xa8-0xa9 GPL,SL VS 136 Device vendor specific log\n0xab GPL VS 1 Device vendor specific log\n0xb0 GPL VS 9048 Device vendor specific log\n0xbe-0xbf GPL VS 65535 Device vendor specific log\n0xc1 GPL,SL VS 16 Device vendor specific log\n0xd1 GPL VS 136 Device vendor specific log\n0xd2 GPL VS 10000 Device vendor specific log\n0xd3 GPL VS 1920 Device vendor specific log\n0xe0 GPL,SL R\/W 1 SCT Command\/Status\n0xe1 GPL,SL R\/W 1 SCT Data Transfer\n\nSMART Extended Comprehensive Error Log Version: 1 (5 sectors)\nNo Errors Logged\n\nSMART Extended Self-test Log Version: 1 (1 sectors)\nNum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n# 1 Extended offline Completed without error 00% 2706 -\n\nSMART Selective self-test log data structure revision number 1\n SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS\n 1 0 0 Not_testing\n 2 0 0 Not_testing\n 3 0 0 Not_testing\n 4 0 0 Not_testing\n 5 0 0 Not_testing\nSelective self-test flags (0x0):\n After scanning selected spans, do NOT read-scan remainder of disk.\nIf Selective self-test is pending on power-up, resume after 0 minute delay.\n\nSCT Status Version: 3\nSCT Version (vendor specific): 522 (0x020a)\nDevice State: Active (0)\nCurrent Temperature: 30 Celsius\nPower Cycle Min\/Max Temperature: 23\/37 Celsius\nLifetime Min\/Max Temperature: 17\/38 Celsius\nUnder\/Over Temperature Limit Count: 0\/84\n\nSCT Temperature History Version: 2\nTemperature Sampling Period: 3 minutes\nTemperature Logging Interval: 59 minutes\nMin\/Max recommended Temperature: 0\/ 0 Celsius\nMin\/Max Temperature Limit: 0\/ 0 Celsius\nTemperature History Size (Index): 128 (105)\n\nIndex Estimated Time Temperature Celsius\n 106 2026-08-23 08:24 33 **************\n ... ..( 2 skipped). .. **************\n 109 2026-08-23 11:21 33 **************\n 110 2026-08-23 12:20 32 *************\n 111 2026-08-23 13:19 31 ************\n 112 2026-08-23 14:18 31 ************\n 113 2026-08-23 15:17 31 ************\n 114 2026-08-23 16:16 30 ***********\n 115 2026-08-23 17:15 30 ***********\n 116 2026-08-23 18:14 29 **********\n 117 2026-08-23 19:13 30 ***********\n 118 2026-08-23 20:12 30 ***********\n 119 2026-08-23 21:11 30 ***********\n 120 2026-08-23 22:10 31 ************\n 121 2026-08-23 23:09 32 *************\n 122 2026-08-24 00:08 33 **************\n 123 2026-08-24 01:07 32 *************\n ... ..( 3 skipped). .. *************\n 127 2026-08-24 05:03 32 *************\n 0 2026-08-24 06:02 33 **************\n 1 2026-08-24 07:01 33 **************\n 2 2026-08-24 08:00 34 ***************\n 3 2026-08-24 08:59 33 **************\n 4 2026-08-24 09:58 33 **************\n 5 2026-08-24 10:57 33 **************\n 6 2026-08-24 11:56 34 ***************\n 7 2026-08-24 12:55 34 ***************\n 8 2026-08-24 13:54 ? -\n 9 2026-08-24 14:53 23 ****\n 10 2026-08-24 15:52 ? -\n 11 2026-08-24 16:51 25 ******\n 12 2026-08-24 17:50 35 ****************\n 13 2026-08-24 18:49 36 *****************\n 14 2026-08-24 19:48 36 *****************\n 15 2026-08-24 20:47 36 *****************\n 16 2026-08-24 21:46 34 ***************\n 17 2026-08-24 22:45 34 ***************\n 18 2026-08-24 23:44 35 ****************\n 19 2026-08-25 00:43 ? -\n 20 2026-08-25 01:42 24 *****\n 21 2026-08-25 02:41 ? -\n 22 2026-08-25 03:40 23 ****\n 23 2026-08-25 04:39 35 ****************\n 24 2026-08-25 05:38 35 ****************\n 25 2026-08-25 06:37 34 ***************\n 26 2026-08-25 07:36 35 ****************\n 27 2026-08-25 08:35 34 ***************\n 28 2026-08-25 09:34 34 ***************\n 29 2026-08-25 10:33 35 ****************\n 30 2026-08-25 11:32 36 *****************\n 31 2026-08-25 12:31 36 *****************\n 32 2026-08-25 13:30 35 ****************\n ... ..( 2 skipped). .. ****************\n 35 2026-08-25 16:27 35 ****************\n 36 2026-08-25 17:26 34 ***************\n 37 2026-08-25 18:25 32 *************\n 38 2026-08-25 19:24 34 ***************\n 39 2026-08-25 20:23 36 *****************\n ... ..( 3 skipped). .. *****************\n 43 2026-08-26 00:19 36 *****************\n 44 2026-08-26 01:18 35 ****************\n 45 2026-08-26 02:17 36 *****************\n 46 2026-08-26 03:16 36 *****************\n 47 2026-08-26 04:15 35 ****************\n ... ..( 5 skipped). .. ****************\n 53 2026-08-26 10:09 35 ****************\n 54 2026-08-26 11:08 34 ***************\n ... ..( 3 skipped). .. ***************\n 58 2026-08-26 15:04 34 ***************\n 59 2026-08-26 16:03 36 *****************\n 60 2026-08-26 17:02 37 ******************\n ... ..( 7 skipped). .. ******************\n 68 2026-08-27 00:54 37 ******************\n 69 2026-08-27 01:53 36 *****************\n 70 2026-08-27 02:52 35 ****************\n 71 2026-08-27 03:51 35 ****************\n 72 2026-08-27 04:50 35 ****************\n 73 2026-08-27 05:49 36 *****************\n 74 2026-08-27 06:48 36 *****************\n 75 2026-08-27 07:47 36 *****************\n 76 2026-08-27 08:46 35 ****************\n 77 2026-08-27 09:45 35 ****************\n 78 2026-08-27 10:44 35 ****************\n 79 2026-08-27 11:43 34 ***************\n 80 2026-08-27 12:42 35 ****************\n ... ..( 4 skipped). .. ****************\n 85 2026-08-27 17:37 35 ****************\n 86 2026-08-27 18:36 36 *****************\n 87 2026-08-27 19:35 37 ******************\n 88 2026-08-27 20:34 37 ******************\n 89 2026-08-27 21:33 37 ******************\n 90 2026-08-27 22:32 36 *****************\n 91 2026-08-27 23:31 35 ****************\n 92 2026-08-28 00:30 35 ****************\n 93 2026-08-28 01:29 34 ***************\n 94 2026-08-28 02:28 32 *************\n 95 2026-08-28 03:27 32 *************\n 96 2026-08-28 04:26 31 ************\n 97 2026-08-28 05:25 35 ****************\n ... ..( 3 skipped). .. ****************\n 101 2026-08-28 09:21 35 ****************\n 102 2026-08-28 10:20 34 ***************\n 103 2026-08-28 11:19 32 *************\n 104 2026-08-28 12:18 30 ***********\n 105 2026-08-28 13:17 30 ***********\n\nSMART WRITE LOG does not return COUNT and LBA_LOW register\nSCT (Get) Error Recovery Control command failed\n\nDevice Statistics (GP Log 0x04)\nPage Offset Size Value Flags Description\n0x01 ===== = = === == General Statistics (rev 1) ==\n0x01 0x008 4 93 --- Lifetime Power-On Resets\n0x01 0x010 4 2709 --- Power-on Hours\n0x01 0x018 6 135892014017 --- Logical Sectors Written\n0x01 0x020 6 661825138 --- Number of Write Commands\n0x01 0x028 6 213060568336 --- Logical Sectors Read\n0x01 0x030 6 942594650 --- Number of Read Commands\n0x01 0x038 6 - --- Date and Time TimeStamp\n0x03 ===== = = === == Rotating Media Statistics (rev 1) ==\n0x03 0x008 4 2546261222 N-- Spindle Motor Power-on Hours\n0x03 0x010 4 2546258875 N-- Head Flying Hours\n0x03 0x018 4 6094 --- Head Load Events\n0x03 0x020 4 0 --- Number of Reallocated Logical Sectors\n0x03 0x028 4 0 --- Read Recovery Attempts\n0x03 0x030 4 0 --- Number of Mechanical Start Failures\n0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors\n0x03 0x040 4 492 --- Number of High Priority Unload Events\n0x04 ===== = = === == General Errors Statistics (rev 1) ==\n0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors\n0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion\n0x05 ===== = = === == Temperature Statistics (rev 1) ==\n0x05 0x008 1 30 --- Current Temperature\n0x05 0x010 1 34 --- Average Short Term Temperature\n0x05 0x018 1 29 --- Average Long Term Temperature\n0x05 0x020 1 38 --- Highest Temperature\n0x05 0x028 1 0 --- Lowest Temperature\n0x05 0x030 1 35 --- Highest Average Short Term Temperature\n0x05 0x038 1 26 --- Lowest Average Short Term Temperature\n0x05 0x040 1 32 --- Highest Average Long Term Temperature\n0x05 0x048 1 29 --- Lowest Average Long Term Temperature\n0x05 0x050 4 0 --- Time in Over-Temperature\n0x05 0x058 1 70 --- Specified Maximum Operating Temperature\n0x05 0x060 4 0 --- Time in Under-Temperature\n0x05 0x068 1 0 --- Specified Minimum Operating Temperature\n0x06 ===== = = === == Transport Statistics (rev 1) ==\n0x06 0x008 4 1131 --- Number of Hardware Resets\n0x06 0x010 4 732 --- Number of ASR Events\n0x06 0x018 4 0 --- Number of Interface CRC Errors\n |||_ C monitored condition met\n ||__ D supports DSN\n |___ N normalized value\n\nPending Defects log (GP Log 0x0c) not supported\n\nSATA Phy Event Counters (GP Log 0x11)\nID Size Value Description\n0x000a 2 9 Device-to-host register FISes sent due to a COMRESET\n0x0001 2 0 Command failed due to ICRC error\n0x0003 2 0 R_ERR response for device-to-host data FIS\n0x0004 2 0 R_ERR response for host-to-device data FIS\n0x0006 2 0 R_ERR response for device-to-host non-data FIS\n0x0007 2 0 R_ERR response for host-to-device non-data FIS\n\nSeagate FARM log (GP Log 0xa6) supported [try: -l farm]\n\n\u003c\/pre\u003e","brand":"Robert Elder Software Inc's Store","offers":[{"title":"Default Title","offer_id":52353042809120,"sku":null,"price":175.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/8945\/5392\/files\/PXL_20260914_170034400.jpg?v=1789411390"},{"product_id":"1tb-seagate-constellation-es-3-enterprise-hard-drive-78-powered-on-hours","title":"1TB Seagate Constellation ES.3 Enterprise Hard Drive (78 Powered On Hours)","description":"\u003cp\u003eThis is a 'used' Seagate Constellation ES.3 Hard Drive 7200 RPM Serial, SATA Rev 3.0. with 78 powered on hours.\u003c\/p\u003e\n\u003cp\u003eThis drive still works perfectly and it passes multiple passes with badblocks and an extended smart test.\u003c\/p\u003e\n\n\u003cp\u003eWhen I first started up this drive, it had 0 powered on hours. The 78 hours are from my initial testing.\u003c\/p\u003e\n\n\u003cstrong\u003eNOTE: When this particular drive boots up it will have write caching *disabled* by default. This is not typical and may lead to unexpectedly poor write performance if you don't enable write caching. Since this is an enterprise drive, write caching was likely disabled on boot by default in the firmware to fit the customer's needs (which was probably higher reliability in the event of unexpected power loss). If you don't understand what this means, then you probably shouldn't buy this hard drive.\u003c\/strong\u003e\n\n\u003cp\u003eIt's possible that windows may automatically enable write caching at boot for this drive, but I don't know for sure and I offer no guarantee about such behaviour.\u003c\/p\u003e\n\n\u003cp\u003eOn Linux, you can turn on write caching using the 'hdparm' command:\u003c\/p\u003e\n\n\u003cpre\u003e\nsudo hdparm -W 1 \/dev\/sdX\n\u003c\/pre\u003e\n\n\u003cp\u003eHowever, this change will only last until the next reboot. To make the change permanent, you will probably need to add a custom udev rule.\u003c\/p\u003e\n\n\u003cp\u003eYou will receive the exact same drive with the serial number shown in the images.  \u003c\/p\u003e\n\u003cp\u003eSince this is a used drive, it is being sold 'as is' and without warranty.   I can personally certify that the output shown below is real and was actually run on this specific drive by me, and also that I ran badblocks tests on this specific drive and found no issues.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003eHere is the output from running fdisk -l \/dev\/sde on this drive:\u003c\/h1\u003e\n\u003cpre\u003e\nDisk \/dev\/sde: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors\nDisk model: USB3.0 DISK03 \nUnits: sectors of 1 * 512 = 512 bytes\nSector size (logical\/physical): 512 bytes \/ 512 bytes\nI\/O size (minimum\/optimal): 512 bytes \/ 512 bytes\n\u003c\/pre\u003e\n\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eHere is the output from running hdparm -I \/dev\/sde on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e\n\/dev\/sde:\n\nATA device, with non-removable media\n\tModel Number: MB1000GCWCV \n\tSerial Number: Z1W2Z3EF \n\tFirmware Revision: HPGD \n\tTransport: Serial, SATA Rev 3.0\nStandards:\n\tUsed: unknown (minor revision code 0x0028) \n\tSupported: 9 8 7 6 5 \n\tLikely used: 9\nConfiguration:\n\tLogical\t\tmax\tcurrent\n\tcylinders\t16383\t16383\n\theads\t\t16\t16\n\tsectors\/track\t63\t63\n\t--\n\tCHS current addressable sectors: 16514064\n\tLBA user addressable sectors: 268435455\n\tLBA48 user addressable sectors: 1953525168\n\tLogical Sector size: 512 bytes\n\tPhysical Sector size: 512 bytes\n\tLogical Sector-0 offset: 0 bytes\n\tdevice size with M = 1024*1024: 953869 MBytes\n\tdevice size with M = 1000*1000: 1000204 MBytes (1000 GB)\n\tcache\/buffer size = unknown\n\tForm Factor: 3.5 inch\n\tNominal Media Rotation Rate: 7200\nCapabilities:\n\tLBA, IORDY(can be disabled)\n\tQueue depth: 32\n\tStandby timer values: spec'd by Standard, with device specific minimum\n\tR\/W multiple sector transfer: Max = 16\tCurrent = ?\n\tRecommended acoustic management value: 254, current value: 0\n\tDMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 \n\t Cycle time: min=120ns recommended=120ns\n\tPIO: pio0 pio1 pio2 pio3 pio4 \n\t Cycle time: no flow control=120ns IORDY flow control=120ns\nCommands\/features:\n\tEnabled\tSupported:\n\t *\tSMART feature set\n\t *\tPower Management feature set\n\t *\tWrite cache\n\t *\tLook-ahead\n\t *\tWRITE_BUFFER command\n\t *\tREAD_BUFFER command\n\t *\tNOP cmd\n\t *\tDOWNLOAD_MICROCODE\n\t *\t48-bit Address feature set\n\t *\tDevice Configuration Overlay feature set\n\t *\tMandatory FLUSH_CACHE\n\t *\tFLUSH_CACHE_EXT\n\t *\tSMART error logging\n\t *\tSMART self-test\n\t *\tGeneral Purpose Logging feature set\n\t *\tWRITE_{DMA|MULTIPLE}_FUA_EXT\n\t *\t64-bit World wide name\n\t *\tIDLE_IMMEDIATE with UNLOAD\n\t \tWrite-Read-Verify feature set\n\t *\tWRITE_UNCORRECTABLE_EXT command\n\t *\t{READ,WRITE}_DMA_EXT_GPL commands\n\t *\tSegmented DOWNLOAD_MICROCODE\n\t \tunknown 119[6]\n\t *\tunknown 119[7]\n\t *\tGen1 signaling speed (1.5Gb\/s)\n\t *\tGen2 signaling speed (3.0Gb\/s)\n\t *\tGen3 signaling speed (6.0Gb\/s)\n\t *\tNative Command Queueing (NCQ)\n\t *\tPhy event counters\n\t *\tIdle-Unload when NCQ is active\n\t *\tNCQ priority information\n\t *\tREAD_LOG_DMA_EXT equivalent to READ_LOG_EXT\n\t \tDMA Setup Auto-Activate optimization\n\t *\tSoftware settings preservation\n\t \tunknown 78[7]\n\t *\tSMART Command Transport (SCT) feature set\n\t *\tSCT Write Same (AC2)\n\t *\tSCT Error Recovery Control (AC3)\n\t *\tSCT Features Control (AC4)\n\t *\tSCT Data Tables (AC5)\n\t \tunknown 206[12] (vendor specific)\nLogical Unit WWN Device Identifier: 5000c50079bfadb4\n\tNAA\t\t: 5\n\tIEEE OUI\t: 000c50\n\tUnique ID\t: 079bfadb4\nChecksum: correct\n\u003c\/pre\u003e\n\n\u003ch1\u003e\u003cspan style=\"color: rgb(5, 5, 5); background-color: rgb(255, 255, 255);\"\u003eAnd here is the result from running smartctl -x \/dev\/sde on this drive:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cpre\u003e\nsmartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.0.0-31-generic] (local build)\nCopyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF INFORMATION SECTION ===\nModel Family: Seagate Constellation ES.3\nDevice Model: MB1000GCWCV\nSerial Number: Z1W2Z3EF\nLU WWN Device Id: 5 000c50 079bfadb4\nFirmware Version: HPGD\nUser Capacity: 1,000,204,886,016 bytes [1.00 TB]\nSector Size: 512 bytes logical\/physical\nRotation Rate: 7200 rpm\nForm Factor: 3.5 inches\nDevice is: In smartctl database 7.5\/5706\nATA Version is: ACS-2, ATA8-ACS T13\/1699-D revision 6\nSATA Version is: SATA 3.0, 6.0 Gb\/s (current: 6.0 Gb\/s)\nLocal Time is: Tue Sep 15 03:03:27 2026 UTC\nSMART support is: Available - device has SMART capability.\nSMART support is: Enabled\nAAM feature is: Unavailable\nAPM feature is: Unavailable\nRd look-ahead is: Enabled\nWrite cache is: Enabled\nDSN feature is: Unavailable\nATA Security is: Unavailable\n\n=== START OF READ SMART DATA SECTION ===\nSMART Status not supported: Incomplete response, ATA output registers missing\nSMART overall-health self-assessment test result: PASSED\nWarning: This result is based on an Attribute check.\n\nGeneral SMART Values:\nOffline data collection status: (0x82)\tOffline data collection activity\n\t\t\t\t\twas completed without error.\n\t\t\t\t\tAuto Offline Data Collection: Enabled.\nSelf-test execution status: ( 0)\tThe previous self-test routine completed\n\t\t\t\t\twithout error or no self-test has ever \n\t\t\t\t\tbeen run.\nTotal time to complete Offline \ndata collection: \t\t( 592) seconds.\nOffline data collection\ncapabilities: \t\t\t (0x7b) SMART execute Offline immediate.\n\t\t\t\t\tAuto Offline data collection on\/off support.\n\t\t\t\t\tSuspend Offline collection upon new\n\t\t\t\t\tcommand.\n\t\t\t\t\tOffline surface scan supported.\n\t\t\t\t\tSelf-test supported.\n\t\t\t\t\tConveyance Self-test supported.\n\t\t\t\t\tSelective Self-test supported.\nSMART capabilities: (0x0003)\tSaves SMART data before entering\n\t\t\t\t\tpower-saving mode.\n\t\t\t\t\tSupports SMART auto save timer.\nError logging capability: (0x01)\tError logging supported.\n\t\t\t\t\tGeneral Purpose Logging supported.\nShort self-test routine \nrecommended polling time: \t ( 2) minutes.\nExtended self-test routine\nrecommended polling time: \t ( 120) minutes.\nConveyance self-test routine\nrecommended polling time: \t ( 3) minutes.\nSCT capabilities: \t (0x103d)\tSCT Status supported.\n\t\t\t\t\tSCT Error Recovery Control supported.\n\t\t\t\t\tSCT Feature Control supported.\n\t\t\t\t\tSCT Data Table supported.\n\nSMART Attributes Data Structure revision number: 10\nVendor Specific SMART Attributes with Thresholds:\nID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n 1 Raw_Read_Error_Rate POSR-- 081 066 044 - 123641667\n 3 Spin_Up_Time PO---- 097 097 070 - 0\n 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0\n 7 Seek_Error_Rate POSR-- 069 060 030 - 7617644\n 9 Power_On_Hours -O--CK 100 100 000 - 78\n 10 Spin_Retry_Count PO--C- 100 100 097 - 0\n180 Unknown_HDD_Attribute PO-RCK 100 100 030 - 0\n194 Temperature_Celsius -O---K 036 040 000 - 36 (0 21 0 0 0)\n196 Reallocated_Event_Count PO--CK 100 100 010 - 0\n ||||||_ K auto-keep\n |||||__ C event count\n ||||___ R error rate\n |||____ S speed\/performance\n ||_____ O updated online\n |______ P prefailure warning\n\nGeneral Purpose Log Directory Version 1\nSMART Log Directory Version 1 [multi-sector log support]\nAddress Access R\/W Size Description\n0x00 GPL,SL R\/O 1 Log Directory\n0x01 SL R\/O 1 Summary SMART error log\n0x02 SL R\/O 5 Comprehensive SMART error log\n0x03 GPL R\/O 5 Ext. Comprehensive SMART error log\n0x04 GPL,SL R\/O 8 Device Statistics log\n0x06 SL R\/O 1 SMART self-test log\n0x07 GPL R\/O 1 Extended self-test log\n0x08 GPL,SL R\/O 2 Power Conditions log\n0x09 SL R\/W 1 Selective self-test log\n0x10 GPL R\/O 1 NCQ Command Error log\n0x11 GPL R\/O 1 SATA Phy Event Counters log\n0x21 GPL R\/O 1 Write stream error log\n0x22 GPL R\/O 1 Read stream error log\n0x24 GPL R\/O 512 Current Device Internal Status Data log\n0x30 GPL,SL R\/O 9 IDENTIFY DEVICE data log\n0x80-0x9f GPL,SL R\/W 16 Host vendor specific log\n0xa1 GPL,SL VS 20 Device vendor specific log\n0xa2 GPL VS 4496 Device vendor specific log\n0xa8 GPL,SL VS 129 Device vendor specific log\n0xa9 GPL,SL VS 1 Device vendor specific log\n0xb0 GPL VS 5176 Device vendor specific log\n0xb5 SL VS 1 Device vendor specific log\n0xb6 GPL VS 1918 Device vendor specific log\n0xbd GPL VS 512 Device vendor specific log\n0xbe-0xbf GPL VS 65535 Device vendor specific log\n0xc1 GPL,SL VS 10 Device vendor specific log\n0xc2 GPL,SL VS 50 Device vendor specific log\n0xc3 GPL,SL VS 8 Device vendor specific log\n0xc4 GPL,SL VS 5 Device vendor specific log\n0xd0 GPL VS 1 Device vendor specific log\n0xe0 GPL,SL R\/W 1 SCT Command\/Status\n0xe1 GPL,SL R\/W 1 SCT Data Transfer\n\nSMART Extended Comprehensive Error Log Version: 1 (5 sectors)\nNo Errors Logged\n\nSMART Extended Self-test Log Version: 1 (1 sectors)\nNum Test_Description Status Remaining LifeTime(hours) LBA_of_first_error\n# 1 Extended offline Completed without error 00% 77 -\n\nSMART Selective self-test log data structure revision number 1\n SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS\n 1 0 0 Not_testing\n 2 0 0 Not_testing\n 3 0 0 Not_testing\n 4 0 0 Not_testing\n 5 0 0 Not_testing\nSelective self-test flags (0x0):\n After scanning selected spans, do NOT read-scan remainder of disk.\nIf Selective self-test is pending on power-up, resume after 0 minute delay.\n\nSCT Status Version: 3\nSCT Version (vendor specific): 522 (0x020a)\nDevice State: Active (0)\nCurrent Temperature: 36 Celsius\nPower Cycle Min\/Max Temperature: 21\/40 Celsius\nLifetime Min\/Max Temperature: 21\/40 Celsius\nSpecified Max Operating Temperature: 60 Celsius\nUnder\/Over Temperature Limit Count: 0\/471\n\nSCT Temperature History Version: 2\nTemperature Sampling Period: 1 minute\nTemperature Logging Interval: 10 minutes\nMin\/Max recommended Temperature: 0\/ 0 Celsius\nMin\/Max Temperature Limit: 0\/ 0 Celsius\nTemperature History Size (Index): 128 (96)\n\nIndex Estimated Time Temperature Celsius\n 97 2026-09-14 05:50 38 *******************\n ... ..( 26 skipped). .. *******************\n 124 2026-09-14 10:20 38 *******************\n 125 2026-09-14 10:30 37 ******************\n ... ..( 2 skipped). .. ******************\n 0 2026-09-14 11:00 37 ******************\n 1 2026-09-14 11:10 36 *****************\n 2 2026-09-14 11:20 35 ****************\n ... ..( 22 skipped). .. ****************\n 25 2026-09-14 15:10 35 ****************\n 26 2026-09-14 15:20 36 *****************\n ... ..( 15 skipped). .. *****************\n 42 2026-09-14 18:00 36 *****************\n 43 2026-09-14 18:10 37 ******************\n ... ..( 18 skipped). .. ******************\n 62 2026-09-14 21:20 37 ******************\n 63 2026-09-14 21:30 36 *****************\n ... ..( 15 skipped). .. *****************\n 79 2026-09-15 00:10 36 *****************\n 80 2026-09-15 00:20 37 ******************\n 81 2026-09-15 00:30 37 ******************\n 82 2026-09-15 00:40 38 *******************\n 83 2026-09-15 00:50 39 ********************\n 84 2026-09-15 01:00 40 *********************\n ... ..( 5 skipped). .. *********************\n 90 2026-09-15 02:00 40 *********************\n 91 2026-09-15 02:10 39 ********************\n 92 2026-09-15 02:20 39 ********************\n 93 2026-09-15 02:30 38 *******************\n 94 2026-09-15 02:40 37 ******************\n 95 2026-09-15 02:50 36 *****************\n 96 2026-09-15 03:00 36 *****************\n\nSMART WRITE LOG does not return COUNT and LBA_LOW register\nSCT (Get) Error Recovery Control command failed\n\nDevice Statistics (GP Log 0x04)\nPage Offset Size Value Flags Description\n0x01 ===== = = === == General Statistics (rev 2) ==\n0x01 0x008 4 5 --- Lifetime Power-On Resets\n0x01 0x010 4 78 --- Power-on Hours\n0x01 0x018 6 7837870274 --- Logical Sectors Written\n0x01 0x020 6 61073419 --- Number of Write Commands\n0x01 0x028 6 7837745222 --- Logical Sectors Read\n0x01 0x030 6 61143248 --- Number of Read Commands\n0x01 0x038 6 - --- Date and Time TimeStamp\n0x03 ===== = = === == Rotating Media Statistics (rev 1) ==\n0x03 0x008 4 78 --- Spindle Motor Power-on Hours\n0x03 0x010 4 78 --- Head Flying Hours\n0x03 0x018 4 12 --- Head Load Events\n0x03 0x020 4 0 --- Number of Reallocated Logical Sectors\n0x03 0x028 4 0 --- Read Recovery Attempts\n0x03 0x030 4 0 --- Number of Mechanical Start Failures\n0x04 ===== = = === == General Errors Statistics (rev 1) ==\n0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors\n0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion\n |||_ C monitored condition met\n ||__ D supports DSN\n |___ N normalized value\n\nPending Defects log (GP Log 0x0c) not supported\n\nSATA Phy Event Counters (GP Log 0x11)\nID Size Value Description\n0x000a 2 6 Device-to-host register FISes sent due to a COMRESET\n0x0001 2 0 Command failed due to ICRC error\n0x0003 2 0 R_ERR response for device-to-host data FIS\n0x0004 2 0 R_ERR response for host-to-device data FIS\n0x0006 2 0 R_ERR response for device-to-host non-data FIS\n0x0007 2 0 R_ERR response for host-to-device non-data FIS\n\n\u003c\/pre\u003e","brand":"Robert Elder Software Inc's Store","offers":[{"title":"Default Title","offer_id":52359619707168,"sku":null,"price":44.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0966\/8945\/5392\/files\/PXL_20260915_221048929.jpg?v=1789517188"}],"url":"https:\/\/shopify.robertelder.org\/collections\/hard-drives.oembed","provider":"Robert Elder Software Inc's Store","version":"1.0","type":"link"}